Not signed in (Sign In)

Vanilla 1.0 is a product of Lussumo. More Information: Documentation, Community Support.

    • CommentAuthorqzz10011
    • CommentTimeNov 17th 2017

    first step, the use of large floor renovation machinery several times to remove the paint grinding layer, the surface 1-2 mm. Note that with 40 mesh, 80 mesh and 120 mesh different thickness of sandpaper three times, the greater the mesh, the smaller the sandpaper, the more scratches left by grinding less obvious, to ensure polished surface smooth and delicate. The second step: scraping the putty floor After

    finishing the floor to be putty scraping putty leveling, use the floor paint and supporting the special transparent primer putty, scraping on the polished floor to be dried. The third step: brush primer, grading treatment putty after the floor brush primer or color processing. As the texture of solid wood surface are natural, can not change the color, can only adjust the floor color depth. The fourth step: brush the

    finish after the primer paint brush again, dry again after carefully ground with water sandpaper, the floor finish to a slight rough feel, remove the dust, brush the second layer of paint. Step five: waxing and polishing To be done after the paint finish, with professional waxing equipment, the floor waxing can be marked on the floor wax. Part3: refurbished without leaving any regrets Note I do not know the basic

    gray composite fencing lumber

    pictures decks with plant boxes with composite

    wall cladding panels price in kerala

Add your comments
    Username Password
  • Format comments as