Not signed in (Sign In)

Vanilla 1.0 is a product of Lussumo. More Information: Documentation, Community Support.


    1, occurred to strengthen the floor soaked in water, in the shortest possible time to strengthen the surface of the water on the floor dry. At the same time take the vacuum cleaner to strengthen the floor in the foam water stitching seam suck the water vapor, or take the hair dryer to dry with cold air, but do not use hot air to prevent the surface due to heat and drying caused by dry deformation.

    2, has been soaked in water from the warp deformation of the laminate floor, the best replacement, do not propose planing the arched part, and then re-paint the approach, because the arching part of the planing, re-paint and lead to other board color Uncoordinated, and the uneven thickness of the entire board, the force is different, prone to potholes.

    3, if it is a large area of ​​water, should promptly strengthen the floor after-sales service, and try to keep strengthening the floor without deformation under the wood floor pry, press the "well" superimposed on the font placed in the ventilation dry, With the weight of its laminated to prevent the occurrence of deformation, attention can not be placed in the sun exposure, under normal circumstances for the better quality of the floor can be re-used.

    4, if it is a small area of ​​water, it is recommended not to pry the floor to dry, so easy to cause hard damage to the floor, it is likely to cause serious consequences can not be restored. It is best to quickly remove the wood baseboard skirting, showing expansion joints, the expansion joints will be distributed to the water vapor, depending on the amount of seepage, drying up usually takes about three to ten days.

    "swimming pool deck designs above ground,украсить панель стены wpc Малайзия,thermal coefficient of wpc"
Add your comments
    Username Password
  • Format comments as